Waterborne acrylic anticorrosive coating for steel structures

Product description

This product series is made of water-based acrylic anti-rust functional resin, non-toxic and environmentally friendly anti-rust pigments, and does not contain organic solvents.

Product performance

Excellent anti-rust performance, using water as the dispersion medium, in line with environmental protection requirements; good adhesion, excellent chemical resistance, long-lasting bright color; good matching, construction according to our company's recommendations, and a service life of more than 5 years.

Application range

It is suitable for external corrosion protection of various large-scale steel structures, mechanical equipment, guardrail pipes, iron castings, oil tanks, petrochemical oil pipelines and devices with harsh environments and high anti-corrosion performance requirements; the primer is not only matched with the company's top coat, but also It can be used as a matching primer for various solvent-based anti-corrosion coatings and other industrial paints for metal substrates.

Construction instructions

Surface treatment: new steel: sandblasting up to Sa2 standard. For temporary surface protection a suitable shop primer may be applied.

For other surfaces: Use detergent to remove grease and high pressure fresh water to remove salt and other contaminants. Remove rust and loose coating with sandblasting and power tools.

Construction conditions: Construction should be carried out according to the best construction conditions normally required, and a large amount of ventilation should be provided during construction and drying in a narrow space. It can be coated, brushed and sprayed. It is recommended to use high-pressure airless spraying to obtain a uniform and good coating film. It must be stirred evenly before construction. If the viscosity is too high, 5%-10% of the original paint weight can be diluted with clean water to the construction viscosity. The relative humidity is less than 85%, and the surface temperature is higher than the construction temperature required by the product (usually 5°C, see the certificate for details) and higher than the dew point temperature by 3°C.

Recommended packages

WT108DB water-based acrylic primer 1-2 times

WT108MS water-based acrylic topcoat 1-2 times, it is recommended that the total dry film thickness is not less than 150klm

Storage and Packaging

Storage temperature package 20 ±0.1 kg Executive standard: HG/T5176-2017

Supporting construction technical parameters