Waterborne coating for stone coated metal roof tile

Product Description

This product series is a new generation of environmentally friendly waterproof adhesives, made of water-based acrylic functional resins and Nano-functional materials, without organic solvents and heavy metal pigments.

Product performance

Good chemical resistance and water resistance, moderate flexibility, excellent sand adhesion ability, can meet the protection requirements of the entire coating; water is used as the dispersion medium, no toxic and harmful substances are produced during the construction process and the film-forming process of the coating, which meets the requirements of Environmental protection requirements; Good matching, the coating film adheres firmly to metal substrates such as galvanized steel and steel, and can enhance the adhesion of the upper coating film.

Application range

The panels applied with this primer are suitable for occasions where the ambient temperature ranges from -50°C to 50°C. The construction is carried out according to our company's recommendations, and the service life can reach more than 25 years.

Recommended painting system

WT201DB color stone metal tile glue primer;

WT201MS color stone metal tile glue finish.

Construction instructions

Surface Preparation: The performance of a coating is usually directly proportional to the degree of surface preparation. Be sure to require the board to be free of oil, dust and other impurities. Construction conditions: Construction shall be carried out according to the best construction conditions normally required, the relative humidity shall be less than 85%, and the substrate temperature shall be greater than 10°C and greater than the dew point temperature by 3°C. Provide plenty of ventilation during application and drying in confined spaces.

Construction method: It is recommended to use high-pressure airless spraying to obtain a uniform and good coating film. In order to ensure good sag resistance of the coating film, there is no need to add water to dilute the base coat, and moderately add water to the top coat depending on the gloss.

Drying conditions: 80°C, 20-30 minutes.

Storage and Packaging

Storage temperature "0°C, package 50 ± 0.1 kg,

Primer model: WT201DB,

Topcoat model: WT201MS.

Remarks: Customers please read our product description in detail and construct according to the conditions suggested by our company. For construction and storage conditions beyond our recommended range, please consult our technical department, otherwise abnormal phenomena may occur.

Supporting construction technical parameters