Waterborne alkyd anticorrosive coating for steel structures

Product description

This product series is made of water-based alkyd functional resin, non-toxic and environmentally friendly anti-rust pigments, without adding organic solvents

.

Product performance

Excellent anti-rust performance, using water as the dispersion medium, meets environmental protection requirements; good adhesion, good matching, construction according to our company's suggestion, and the service life is more than 5 years. High tolerance to incomplete rust removal.

Application range

It is suitable for external corrosion protection of various large-scale steel structures, mechanical equipment, guardrail pipes, iron castings, oil tanks, petrochemical oil pipelines and devices with harsh environments and high anti-corrosion performance requirements; the primer is not only matched with the company's top coat, but also It can be used as a matching primer for various solvent-based anti-corrosion coatings and other industrial paints for metal substrates.

Construction instructions

Surface treatment: new steel: sandblasting up to Sa2 standard. For temporary surface protection a suitable shop primer may be applied. For other surfaces: Use detergent to remove grease and high pressure fresh water to remove salt and other contaminants. Remove rust and loose coating with sandblasting and power tools.

Construction conditions: Construction should be carried out according to the best construction conditions normally required, and a large amount of ventilation should be provided during construction and drying in a narrow space. It can be applied by lifting, brushing and spraying. It is recommended to use high-pressure airless spraying to obtain a uniform and good coating film. It must be stirred evenly before construction. If the viscosity is too high, 5%-10% of the original paint weight can be diluted with clean water to the construction viscosity. The relative humidity is less than 85%, and the construction surface temperature is greater than 0°C and greater than the dew point temperature by 3°C.

Recommended packages

WT1001DB 1-2 times water-based alkyd primer 1-2 times

WT1001MS 1-2 times, it is recommended that the total dry film thickness of supporting equipment should not be less than 150klm.

Storage and Packaging

Storage temperature 20°C, packing 20 ± 0.1 kg Executive standard: HG/T5176-2017

Supporting construction technical parameters