Waterborne acrylic heat insulation anticorrosive coating
Product description
This product is formulated with water-based acrylic emulsion as the film-forming base material, adding anti-rust pigments, weather-resistant pigments, heat-insulating powder and other materials. Anti-rust pigments with high heavy metal content such as aluminum and lead are not added.
Product performance
Has excellent weather resistance, UV resistance and self-cleaning function;
Excellent near-infrared and visible light reflection performance, and it can provide excellent heat insulation effect when used together with heat insulation primer; Excellent acid resistance, salt water resistance, salt spray resistance, wide applicability.
Application range
It is suitable for metal products such as chemical petroleum storage tanks, metal workshops, locomotive carriages, metal pipelines, etc. that have both heat insulation requirements and high anti-corrosion requirements.
Recommended packages
WT108DB water-based acrylic primer 2 times
2-3 coats of WT205T water-based acrylic heat-insulating paint. It is recommended that the total dry film thickness of the package should not be less than 500pm.
Construction instructions
Surface treatment: The performance of the coating is usually proportional to the degree of surface treatment. When coating on the matching coating, the surface is required to be clean and dry, free from oil, floating dust and other impurities. It must be stirred evenly before construction. If the viscosity is too high, you can add clean water to dilute to the construction viscosity. In order to ensure the quality of the paint film, we recommend that the amount of water added be 0%-5% of the original paint weight. Multi-layer construction is adopted, and the last layer of coating must be carried out after the surface of the previous layer of paint is dry. The relative humidity is less than 85%, and the construction surface temperature is greater than 10°C and greater than the dew point temperature of 3°C. Rain, snow, and weather cannot be applied outdoors. If it has been constructed, it can be covered with a tarpaulin to protect the paint film.
Executive standard: HG/T5176-2017 GB/T50393-2017
Supporting construction technical parameters
Gloss |
glossy matte |
Color |
White |
Volume solids content |
|
Theoretical spreading rate |
About 2㎡/L (based on 200 μm dry film) |
Specific gravity |
About 1.25Kg/L |
Surface dry |
≦30min (25℃ ) |
Hard work |
≦24h (25℃ ) |
Recoating time |
Minimum 4h, maximum 48h ( 25 ℃ ) |
Thermal insulation temperature difference |
≧10 ℃ |